Garmin Band Width: Which Size Fits?
Garmin Band Width: Which Size Fits?
Garmin watches use two different band systems that are not interchangeable with each other. Order the wrong width and the replacement band simply won't attach to the case. Here is how to find the right size for your model.
Two systems: QuickFit and Quick Release
| System | Widths available | Fastening |
|---|---|---|
| QuickFit (Garmin's own design) | 20 mm, 22 mm, 26 mm | Latch that clicks onto the case bar, no tools needed |
| Quick Release (industry standard) | 18 mm, 20 mm, 22 mm, 24 mm | Spring bar you slide inward to swap the band |
QuickFit and Quick Release bands are not interchangeable, even where both systems offer the same 20 mm or 22 mm width — the bar and mount are built differently.
How to find your model's width
The most reliable source is your model's own product page on garmin.com: band width is listed under Specs > General > Physical Size. If you still have the original band, you can instead measure the gap between the two case bars with a ruler, in millimetres — that is the width you need.
Known QuickFit 26 mm compatibility
Garmin officially confirms 26 mm QuickFit bands for the fēnix 3, fēnix 3 HR, tactix Bravo, D2 Bravo, quatix 3, and the Foretrex 601, 701, 801 and 901 outdoor devices. The smaller 20 mm and 22 mm QuickFit bands do not fit these models.
kwmobile carries Garmin-compatible accessories in the Garmin overview. General device-identification steps are on Which model do I have?
FAQ
Will a 20 mm Quick Release band fit a watch with a QuickFit connector?
No. Even at the same stated width, the two systems are mechanically different and not interchangeable.
Where exactly is my model's band width listed?
On your model's product page on garmin.com, under Specs > General > Physical Size.
How do I tell QuickFit from Quick Release without a spec sheet?
QuickFit bands release via a latch on the case bar, no tools needed. Quick Release bands have a spring bar you push inward with a small pin or fingernail.